双笔记本垂直站立架
Laptop stand vertical for two laptops
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I liked the original design by @Kuba, but I needed it for two laptops, so I added a second one. It supports laptops up to 2cm thick. I also added some fabric to prevent scratching my laptop.
I used eSun PLA Matte in White with 15% infill. I would recommend at least 15% infill; otherwise, the middle part might be too weak and may not support the weight of a laptop leaning on it.
This was my first experience with designing, so if you have any suggestions for improvement, please let me know.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Pro
- Rafts:No
- Supports:No
- Resolution:0.20
- Infill:15%
- Filament brand:
eSun
- Filament color:
White
- Filament material:
PLA Matte
Tags
License
Laptop stand vertical for two laptops
by Slikhut is licensed under the Creative Commons - Public Domain Dedication license.
相关内容
猜你喜欢
联系我们
热门推荐
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Pebbles弗林特斯石：活力四射的小 Pebbles2023-03-27 -
Creality Ender-3 S1型号打印机摄像头支架2024-03-21 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
三脚架快速下放板2024-03-28
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
鞋撑2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
兔女郎半身像2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24