可堆叠式金属绳存储架

Gridfinity Stackable Wire spool Holder

2024-02-04 14:03:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the "Wire spool Skadis mount" by @Rene as well as the remix made by @Otter (https://www.printables.com/model/469616-wire-holder-gridfinity) that added gridfinity support. I liked the model made by @Otter however it did not allow for stacking and only worked with slim spools of wire so I modified the holder to be stackable and included a double-width version that takes up a 2x2 grid space. There are 2 widths for the spool dowels. a 23mm version and a 20mm version, print whatever version you need for your spools.

I have included an OpenSCAD file for the spindle to allow making spindles for any size of wire, you can download the .scad file or use the customizer to make custom spindle holders.

Print with a 0.2mm layer height so the magnet holes print correctly.

Optional: Uses standard 6x2mm magnets just like the standard gridfinity bins.

Optional: Uses M3x6 screws on the top to allow stacked bins to be magnetically attached.