可调节Pi摄像头V2支架（Cam mod版）适用于Ender 3

(Cam mod) Adjustable Pi Camera V2 Holder for Ender 3

2024-02-04 18:03:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my personal combo for this pi camera kit, the only thing I've added here is the PiCameraCaseFrontMod.stl file. This takes the original front of the case and removes some plastic above where the ribbon cable goes in, allowing for much easier installation, and still allows the part to close shut. With my printer atleast, the original just did not print well and made it extremely difficult to put together, this makes it wayyy easier in my opinion.

(your slicer may be upset about holes in the model, thats cuz this was a very shoddily done job by me just to get the print working in my case, use at ur own risk (not that there is any))

the longer arm by TikiiTorch
(https://www.thingiverse.com/thing:5245447)
and the original design from Sebby5
(https://www.thingiverse.com/thing:4358987)