奥特利贝 QL3.1 底座固定点

Ortlieb QL3.1 bottom pin

2024-02-04 18:45:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement for the bottom pin in Ortlieb QL3.1 pannier mount.

To use this pin, one must replace the original socket head cap bolt (M5x30) with a countersunk bolt (also M5x30).
This allows for a thicker material around the head of the bolt, so that an item printed out of filaments much weaker than Ortlieb's plastic will endure same stress.

Mine got ripped when I fastened the pannier, heard the customary click, and went on with riding my bike, but I accidentally fastened only one of the top pins rather than both of them. So my bag fell off on the first larger bump, sending the ruptured part into oblivion. So the replacement is likely not to follow all dimensions of the original, but operates as expected.

Printing the part is faster (and cheaper) than sourcing a new mount - sadly Ortlieb does not seem to provide any replacement parts.

I printed mine out of ASA, 0.2mm layer Double check your printer dimension accuracy: the shaft of the pin shall be 10mm (as in the .stl file) to fit perfectly.0.5mm nozzle, with no brim or raft.
Double check your printer dimension accuracy: the shaft of the pin shall be 10mm (as in the .stl file) to fit perfectly.