瓶盖开启器

bottle opener

2023-03-26 18:10:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

~~~~~ DISCLAIMER ~~~~
nthis is not invented by me!!n
nthe original invention belongs to Mark MangernnYou can buy the original made from aluminium here: https://www.gropener.com/

I made a remix from the printable version you can find here: https://www.thingiverse.com/thing:269463

I made the whole thing a bit thicker so the coin is now completely held inside the print.

I did this solely because for my findings it gives the bottle opener a lot more strength in the weakest spot which is around the coin.

you can print this without any supports.

in my case I find no need for superglue to hold the coin in place as I added a small undercut to hold the coin.nnThe coin used is a 1 cent euro coin!

Version info:

V1 is for use with a coin but without a magnet to hold the bottle capnnV2 is for use with a coin and a magnet to hold the bottle capnnYou will need some super glue to hold the magnet in place

I used this kind of magnet: https://www.amazon.de/Magnetastico-K%C3%BChlschrankmagnet-Pinnwandmagnet-Dauermagnet-Scheibenmagnet/dp/B00Z84F6KC/ref=sr_1_6?keywords=neodym+6x2&qid=1676639983&sprefix=neodym+6%2Caps%2C95&sr=8-6

瓶盖开启器

朋友，你觉得上面这个模型，属于下面的哪个分类？