本田HR-V 1999至2006款后备箱架挂钩夹具

Honda HRV 99-06 boot shelf hook clip

2024-02-05 00:24:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replacement hook for the boot shelf of first gen Honda HR-V. You still need the metal part of the original hook (which was the only part that still stands after 20 years). Initially, I printed it using a resin printer... just don't. Even with stronger resigns, it didn't last more than a few in-outs. The PETG version is perfect, probably PLA would be as good.

The file has 3 already in place. I just multiplied it in my 3d software (I think I did it with fusion) for the initial resin print (the slicer didn't allow it), and I didn't bother with a re-export.

Printed on .2 with 15% infill and supports for the lips. This is a 100% replica of the original - it would probably be fine without them.