遥控器持有者

Remote Control Holder

2024-02-05 01:18:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remote control holder I designed to fit my couch cup-holder. It holds them at a 60 degree angle and easy to slip in and out.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Doesn't Matter
Supports:
No
Infill:
80

Post-Printing

Fit the holder and the cup mount

The cup mount has two holes that are 5mm diameter. The holes on the connector piece is 5.5mm diameter. I made it to accept the M5 threaded insert. However the 5mm hole on the mount needed to be enlarged with a drill to make the M5 screw fit, thus I suppose M4 screws and threaded inserts would work better.

The plate is a press fit to the connector piece. Put a drop of glue to keep it secure if you want.

How I Designed This

This was designed using tinkercad

Tags

firetv remote Remote control remote control holder

遥控器持有者

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

通用型1/10比例底盘 - DKS基础款
2023-03-26
MK47 模组道具枪
2023-03-26
BlueSCSI v2 SPARCstation驱动器支架及密封环
2024-04-14
超越IPD板
2024-05-03
沙丘巡游者
2024-05-03

最新模型