安全锁延伸器
Safety Latch Extender
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This child safety latch extender block can work on both left-side and right-side cabinet doors. It allows the door to open about one more inch (25mm) so you can get your finger in there to push down the latch.
There are four pilot holes for mounting the latch to the extender block. Use whichever pair is in the correct orientation after the block is mounted to the door.
The block has a small offset to fit into the inside corner of the frame. The block-mounting holes have a sacrificial bridge layer for easy printing. Just drive your screw right through that layer.
Print face-down as shown in the screenshot. No supports needed.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK4
- Rafts:No
- Supports:No
- Resolution:0.2 mm
- Infill:15%
- Filament brand:
Prusament
- Filament color:
White
- Filament material:
PLA
Tags
License
Safety Latch Extender
by mcavoya is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Naked GoPro 7 FPV mount (Gopro-style mount)2023-04-23 -
智能路STER双杯架2024-03-16 -
巫师的法术追踪器带存储盒2024-04-17 -
18650电池存储盒2024-04-18 -
更大的手机浴室置物架2024-04-30
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Daft Punk Thomas 3D打印可穿戴头盔2023-03-26 -
Articulated Snake2024-03-30 -
沙箱建筑模型2024-05-08
最新模型
-
蝴蝶刀 - 即时打印（更大刀刃）2024-05-08 -
帕特农神庙2024-05-08 -
HO比例石墙材质2024-05-08 -
宝马E34布罗塞座椅齿轮3D模型2024-05-06 -
Jenga盒子2024-05-06