X5SA Pro V6 Titan煎饼式直驱双轴5015

X5SA Pro V6 Titan pancake direct drive dual 5015

2024-02-05 02:29:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Work in progress!!

I will post complete instructions and info soon... I hope

This is a major upgrade from my previous design: https://www.thingiverse.com/thing:5438925
It should be compatible with all Pro versions, and might also work with the normal one.

The desing now uses two 5015 sized layer fans, a huge improvement form the original 4010. Also, more things were imrpoved, such as tolerances, space used, cable managment and general sturdiness. The prints themself are probably around 20-30g, making for an aprox. final weight of 350g (I think, will have to check though) with the pancake motor.

You will have to print a Y-endstop extender (file included), because the final print space gets reduced to around 395x385 in the case of the X5SA 400 Pro. To be fair, it was actually impossible to print right on the edge of the bed before, so it's not a big deal.