瑞博 40伏特叶子吹风器喷嘴

Ryobi 40 volt leaf blower nozzle

2024-02-05 03:25:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a reducer nozzle for the Ryobi RY40408VNM 40V cordless leaf blower I made in Tinkercad. It helps make the airflow more concentrated and extends the discharge quite a bit.
It's a friction fit on the end of the tube but you can certainly fasten it mechanically somehow. I printed in PLA. I was thinking about printing in TPU but the fit is pretty good so I'm not doing that at this time.
I have included a test ring that is basically the bottom 5mm of the print so you can make sure it fits properly without printing the entire thing. You may need to scale the print up or down a couple percent depending on the tolerances of the discharge tube that is included with the blower.
This is my first share so if I missed something here, just hit me up and I'll add it.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20 percent
Filament brand:
Overture
Filament color:
black
Filament material:
PLA+
Notes:
If you up the wall count on the print the infill becomes irrelevant as this is only about 2.5mm thick.