衣架连接部件更换技术

Coat Rack Joint Replacement

2024-02-05 03:39:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Coat Rack Joint that I made to replace one that broke.

This took me around 1 hour to print and used about 23g of filament. I printed it in grey to match the other original joint.

Print Settings

Printer brand:
AnkerMake
Printer:
Ankermake M5C
Rafts:
No
Supports:
Yes
Infill:
100% Gyroid
Filament brand:
AMZ
Filament color:
Grey
Filament material:
PLA
Notes:
Print Coat Rack Joint v3 as this is this fits the correct dimensions stated below.

The files should already be oriented in the correct orientation for printing.

I recommend using a brim to hold it in place.

How I Designed This

I designed this in TinkerCAD. I have also posted this on Printables, which you can find here: https://www.printables.com/model/751246-coat-rack-joint-replacement.

Custom Section

Measurements

Although I have made this to fit the dimensions that I measured, If you need one with different dimensions for the bars, feel free to ask, and I will add it here, or remix it to make it fit your coat rack.

The dimension of the vertical bar that it is meant to fit is 22.75 X 22.75mm. The dimension of the horizontal bar is: 23 X 23mm.

The dimensions of the actual joint is: 65.26 X 25.81 X 63.2mm.

Once again feel free ask me to change the dimensions to fit your coat rack or remix it. Please leave comments suggesting what I could do to make it better or how you found it. Happy Printing!!