棍子和绳索挂钩

Diabolo stick & string holder

2024-03-29 01:33:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Do you diabolo (also known as "Chinese Yo-yo")? Are you tired of winding the string round the sticks to put them away, only to find the string is tangled again when you try to remove them?
Hopefully, then, this model is for you.
Designed to look (a bit) like a diabolo with a crossed pair of sticks, this will hold a pair of sticks (tucked into the two holes, which are angled to provide a little bit of a grip), and the string can be wrapped around the axle of the holder, then tucked into a little gap to hold firm.
I've printed this at anywhere from .12mm to .2mm, and can't say I really have much of a preference. As you can see from the pictures, there's a nice effect with using two filaments, where the diabolo body and the sticks can be different colours.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Any
Infill:
20%
Notes:
Supports aren't necessary and could be irritating to remove from the holes where the sticks go.
If you print with a pause to change filaments at the right layer (depends on what resolution you print at), you can have the diabolo body and sticks come out in different colours, as shown in one of the pictures.
If it doesn't fit your sticks, maybe magnify by a small amount.