Simplex MMDVM 快速安装盒

Snap Case for Simplex MMDVM and Raspberry pi 3

2024-02-05 08:20:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of dlevasseur's MMDVM Duplex Hat RaspberryPi3 Snap Case. I have modified it to fit the Simplex MMDVM (typical Chinese MMDVM). There is an optional clip-on fan cage for a 5v brushless "quiet" fan and two optional wall mounts. One using magnets to attach to a metal surface and one using two small screws.

The fan is connected to a USB A plug and uses any one of the pi's USB sockets.

Fan is described as: 3007 Fan for Raspberry Pi 4 30x30x7mm Cooler Fan Pi Brushless Cooling Fan 30MM 1.18in 3.3V 5V DC Quiet Fan. The fan does not produce that much air but keeps my Raspberry pi 3 under 49 degrees C. The label on the fan should face down towards the pi.

Magnets for wall mount are described as: Neodymium Magnet - 10mm dia x 5mm thick x 3.2mm countersunk