钥匙扣蜂巢夹持器
KeyBar Tweezer Holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A tweezer holder for a KeyBar or any similar keyholder, Large Victorinox tweezers fit.
I have uploaded two versions, one with a very short thumb stub and one with a longer one.
I use the short in my KeyBar, feel free to modify it and make it better.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:0.12
- Infill:20%
- Filament brand:
Sunlo
- Filament color:
Silver
- Filament material:
PLA
- Notes:
Printed using a 0.4mm nozzle on Cura's super quality setting. Support material was used on the inside.
Post-Printing
To remove support material the ends were pulled out with tweezers then a small flat head screwdriver was hammered down the tweezer channel to remove the remaining support material.
License
KeyBar Tweezer Holder
by williamtaplin is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
40mm立方体测试对象2023-03-27 -
博士奇异人雕塑支撑免费版2023-03-27 -
额外零件用于20毫米挤出链条2023-06-19 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
足球与高尔夫球2024-04-19
最热下载
-
Dado - 立方体模型2024-03-24 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
盐湖插入整理器2024-04-13 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
系带3D凉鞋（儿童款）2025-07-16 -
苍井空老师全身像苍井空跪姿2025-06-27
