Enders-3 S1型隐藏灯条模块 - 轻松打印且支持模块化改装。注：新版本1.01链接在备注中

Ender-3 S1 Stealth Light Bar - Easy to print and do mod. *new version 1.01 link in notes

2023-03-26 18:14:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Enders-3 S1型隐藏灯条模块 - 轻松打印且支持模块化改装。注：新版本1.01链接在备注中

This text provides instructions for building both a simple LED light strip installation and a more complex version with a switch. Here's a breakdown: **Simple Version:** 1. **Print:** Print a case for the light strip (the exact design isn't specified but linked to a Thingiverse file). Print three brackets with M3 nut holes. 2. **Install Lights:** Mount the LED strip to the underside of the frame. Solder wires to the LEDs, feeding them through the strip's track. Pay attention to positive (+) and negative (-) leads. 3. **Route Wires:** Thread the wire along the filament sensor wires back to the accessory port. 4. **Connect to Printer:** Solder the other end of the wire to a JST connector, matching the + and - markings on the printer's sticker. 5. **Test:** Plug in the cable and ensure the indicator light turns on. **Switch Version (More Complex):** 1. **Plan & Prepare:** Carefully plan wiring for the switch and allow enough wire length. This version requires more soldering and precise placement. 2. **Print:** Print the light strip case and three brackets with M3 nut holes. 3. **Wiring:** Temporarily position the LED strip, switch, and wires in the case to determine wire lengths. Solder everything together carefully. 4. **Install Lights:** Secure the LED strip in its slot. 5. **Mount Switch:** Carefully push the switch into its housing, tucking excess wiring inside for a clean look. Consider using hot glue for insulation. 6. **Route Wires:** Thread wires along the filament sensor back to the accessory port. 7. **Connect to Printer:** Solder the wires to a JST connector, matching the + and - markings on the printer's sticker. 8. **Test:** Plug in the cable and ensure the indicator light turns on. **General Notes:** * The instructions assume some basic knowledge of soldering and electronics. * The text emphasizes the importance of careful planning and wiring for the switch version. Let me know if you need any further clarification or have specific questions about the instructions!Enders-3 S1型隐藏灯条模块 - 轻松打印且支持模块化改装。注：新版本1.01链接在备注中

朋友，你觉得上面这个模型，属于下面的哪个分类？