另一个用于Rokinon 135mm的夹具
Another clamp for the Rokinon 135mm
2024-02-06 04:15:42
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Made yet another clamp for the Rokinon 135mm. This one goes on the barrel of the lens (where the numbers are), but allowing the aperture ring to be manipulated. This is not very rigid (I printed in PETG) but works fine on 120s exposures. I suggest aligning the painting on the lens with the gap of the clamp.
Instructions:
- Print all parts. 0.3mm with 0.4mm nozzle worked fine for me.
- Make M4 threads on one of the hinges (only possible in one of them). Alternatively, open the hole and use nuts to fix the screws.
- Put all parts together.
- Use a GoPro screw and nut to close the clamp.
If you need more stifness overall, use in conjunction with this one:
https://www.thingiverse.com/thing:6056701/
More useful links:
Focuser:
https://www.thingiverse.com/thing:5600585
Focuser adapter:
https://www.thingiverse.com/thing:5140885
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Raspberry Pi外壳2023-03-27 -
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
可互换的米老鼠耳朵2023-06-24 -
PGO BR200 验车速度传感器盒2023-08-09 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
MK47 模组道具枪2023-03-26 -
管道旋转过滤器（160mm）2024-03-19 -
Halo Reach巴黎级大型战舰2024-05-05 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
HGX lite v2支架2025-07-18 -
天使和恶魔2025-07-16 -
私密羞羞娱乐骰子2025-07-15 -
大码动漫女战士2025-07-15