PI 5型号外壳搭配Pimoroni NVE接口和Waveshare POE帽
PI 5 Case with Pimoroni NVE interface and Waveshare POE Hat
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This increases the height of the original design to allow the installation of the Waveshare POE hat
https://www.amazon.co.uk/dp/B0CRDX2WLS?psc=1&ref=ppx_yo2ov_dt_b_product_details
Modifications are an increase of 5mm to the body, a slight mod to the button hole. The lid has a cut out to expose the GPIO and an increase in the height of the seperators between the USB and Ethernet ports. I've also changed the fan hole to a circle thought its not quite located correctly.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Yes
- Supports:Yes
- Resolution:.2
- Infill:50%
- Filament brand:
Unknown
- Filament color:
Any
- Filament material:
PLA
- Notes:
I used a raft for the body as I was getting constant warping on the front right corner for some reason. I also used tree supports for the body.
相关内容
联系我们
热门推荐
-
Voxelab Aquila可连接床手柄2023-03-26 -
DRIOD BODY R2D2 Star Wars2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
皮卡丘游乐场行李牌2024-03-15 -
JeNo 3" 笼罩 DJI O3 + 支架 + 电池保护 + 40° 防撞器2024-04-19
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Flex Dino钥匙链2023-03-26 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
鞋撑2025-07-17 -
裸女站立2025-07-16 -
兔女郎半身像2025-07-15 -
大码动漫女战士2025-07-15 -
苍井空老师全身像苍井空跪姿2025-06-27