数字块魔法镜子！+太空头盔和火箭附件

Numberblocks Magic Mirror ! Plus space helmets and rocket attachment

2024-03-21 12:04:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My kid loves numberblocks, I'm sure yours do too. I made a bunch of numberblocks toys and just wanted to share them!

Made to the scale of the toys they sell for the smaller ones, check my other creations for the rest of the collection. Enjoy!

This one is a lot of fun. The magic mirror, plus a spinning cube, AND the rocket attachment 1 uses to fly to space. Also my kid wanted some space helmets for them so there is a special helmet for 1, plus the regular helmet that will fit all the single wide block figures from the toys they sell. For the helmets you can also print the shield which just snaps on, I printed that with the top edge down on the build plate and at an angle that didn't require any additional supports.

There are places to put magnets on the back of the mirror and the mirror mount on the rocket so that it can be detached.

To make a spinning cube, print the cube pivots, snip them off clean. drill out the hole in the cube (print that so the hole is vertical, shouldn't need much support). Glue one pivot down in the mirror, mount the cube in place, and slide the second pivot down through the top until it is flush. Then glue that in place only at the top of the mirror.