夹板专属系列（不易脱落）
Clip Pad Limited Range (won't pop off)
2024-02-06 05:53:37
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Have you ever needed the pad of a clap to rotate 90 degree to become totally unusable and then pop off/break/get lost?
Me either.
These only rotate about 30 degrees, about the amount you ever need the pad to rotate and still work.
While I was at it, made a perfectly smooth pad, and a rounded pad made to clamp on tube/pipe/dowel or other cylindrical surfaces.
Started with the 4" medium-small clips from Harbor Freight. Will be checking fit with Dollar Tree ones and adding those. As well as resizing for other clip sizes.
Print sideways nice and strong this way, needs just a little support, and a few seconds of cleanup
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
索尼爱博 ERS-210/220机器人狗 18650替用电池盒2024-01-14 -
Ducati 1260 Multistrada 镜头支架摄像头GPS球形支架2024-03-14 -
玩具式炉门把手2024-03-18 -
Daft Punk 耳垫配件（适用于DmitriK42头盔）2024-03-26 -
Neptune 4 / 4 Pro 的 Cura 切片配置与打印建议2024-05-02
最热下载
-
布恩小恐龙：阿尔洛撕齿兽UpKit - 3DKitbash网2023-03-27 -
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
王国之泪TOTK光龙塞尔达传说2024-04-20 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
俄亥俄州日全食针孔观察器2024-05-03
最新模型
-
母亲节墙面艺术2024-05-08 -
Nemesis侧边替换打印2024-05-08 -
魔幻蘑菇202024-05-06 -
小型储罐支架2024-05-06 -
换挡杆靴套2024-05-06