3dsjs

CNC 3018推力夹紧装置3D模型

CNC 3018 push clamp

2024-02-18 13:12:13

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Remix of CNC low profile clamp, M6 screw by santisis on Thingiverse: https://www.thingiverse.com/thing:6485551 to suit CNC 3018 with 45mm centres on the base. The adjustments are:
Base

  1. Slots are moved to a centre-to-centre distance of 45mm.
  2. Slots are widened to 6mm to suit a 6mm bolt.
  3. Base is widened to 58mm.
    Jaw
  4. Screw holes are reduced to 2.8mm diameter
  5. Padding alongside the screw holes.
    Plate is unchanged.

The width ensures that the fixture spans a complete slot.

Depending on the length of the mounting bolts a washer may be required - a STL file for the washer is included. Print with vertical expansion according to the bolts used.

The screw holes for clamping the plate to the jaw have been reduced to suit a 2.5mm thread. This is the largest screw that will fit the countersinking on the plate. The holes have been left at their current position in order to suit the plate, but it would be an advantage to move them slightly wider apart to give more material at the edge. This would require printing the plate with a slight horizontal expansion.

Freecad files are included.

License

CC BY-NC

CNC 3018 push clamp
by Anacapala is licensed under the Creative Commons - Attribution - Non-Commercial license.

CNC 3018推力夹紧装置3D模型
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

猜你喜欢