SKADIS (56x56cm) 连接BROR架子支架

SKADIS (56x56cm) to BROR shelf Connector

2024-03-12 09:27:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Use case

This connects a 56x56cm SKADIS pegboard to BROR shelves with 54cm depth.

Sits flush with the front of the shelf.
Designed for the left side of the shelf. Mirror if you want to use it for the right side.

Screw the SKADIS pegboard directly into the BROR shelf on the right side.
Use this mounting bracket to mount the left side onto the BROR shelf.

Heat-set inserts

This was the first time I used heat-set inserts. I first got the cheapest ones from amazon which didn't work at all and got filament in the thread when inserting. I switched to ever so slightly more expensive ones with an alternating cross pattern which gives it way more grip.
If you haven't done this before, I recommend this video: https://www.youtube.com/watch?v=hwq15qH-4x4
This also uses the exact type of inserts I used as far as I can tell.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament brand:
GEETECH
Filament color:
White
Filament material:
PLA
Notes:
I printed this in white PLA to test things but I initially wanted to do this with black PLA+ from eSun. It's working so far with 20% infill in white PLA but if it fails I will reprint it with PLA+ and higher infill. Took me around 50 minutes to print with basically default profile. Sliced in PrusaSlicer.

How I Designed This

This was designed using ondsel which is basically FreeCAD with a skin and extra features on top. It's free to use for personal use and can be downloaded at https://ondsel.com/
This was my first design and it took 6 model variations and about 8-9 prints to get right.