Carrera Digital 132赛车带摄像头的3D模型
Carrera Digital 132 Camera Car
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A camera base and holder to mount a GoPro Hero 3+ on a Carrera Digital 132 car.
The base fits on the chassis of the BMW M3 GT2 - 30512.
There are two versions of the base:
V1 uses the original chassis-screws to fix the camera base.
V2 uses M2 nuts in the camera base and M2x16mm screws instead of the original screws.
For the camera holder there are two M3 nuts at the inside of the camera base and two M3x12mm screws from the outside.
The camera can be turned around so it is possible to film the frontside or the backside.
Print Settings
- Printer brand:
AnkerMake
- Printer:
AnkerMake M5
- Rafts:No
- Supports:Yes
- Resolution:0.2mm
- Infill:25%
- Filament brand:
Ankermake
- Filament color:
Black
- Filament material:
PLA+
Tags
License
Carrera Digital 132 Camera Car
by Slimster91 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
星球大战3D棋盘模型：MrBaddeleys国际象棋棋子50%比例展示2023-08-24 -
藏身载具：VKB战斗者装备2024-03-18 -
MX-1000三脚架快速释放装置2024-04-09 -
CS:GO匕首模型2024-04-11 -
Ender-3电源下部支架2024-04-22
最热下载
-
Valorant 杰特的姿态2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Dado - 立方体模型2024-03-24 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
弹弓HGX-FRAME V1A2025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
性感美女3d人像（带基座）2025-07-17 -
鞋带锁2025-07-17