Carrera Guardrail Posts

2024-01-13 06:37:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted guardrails on which I could put track and driver sponsorships just like at real tracks. The guardrails are PVC foam architectural pieces available for sale at most big box lumber hardware outlets like Lowes, Home Depot, etc. in the lumber/trim department. What I specifically used is called Royal Building Products 1/4-in x 1-1/2-in x 8-ft White PVC Lattice Divider. It comes in 8 foot lengths for around $10. It is light and flexy and holds tightly to the curves as a result. I was worried at first that the springiness would overwhelm my posts but they are intact as depicted in these photos after many months of use. Sticker Mule will let you purchase a ten pack of labels in any dimension you design and embellished however you want for a very reasonable price. I decided on a European GTR or F1 motif and threw our law firm in there as a sponsor (tax deduction, anyone?)

There are three versions of the posts/stanchions: regular, with a hole for mounting to your track base, and for elevated portions of the track. The stanchions slide over the guardrails rather than snapping on, but they snap onto the track from underneath.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra Max
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30 to 50
Filament brand:
Overture
Filament color:
red
Filament material:
PLA or PETG
Notes:
Print guardrail post on its side for maximum strength and no need for supports or bed adhesion.