科幻角落屋着陆台

Sci-Fi Corner House With Landing Pad

2024-03-13 13:59:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a little corner house with a landing pad. (Print as shown in image)

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Doesn't Matter
Resolution:
Any
Infill:
Any
Filament brand:
Any
Filament color:
Any (Grey looks good - Might wanna paint the window tho)
Filament material:
Any

How I Designed This

I had this mildly annoying issue (and very specific) with the fact that, on blinds, the wheel at the top sits perpendicular to the wall, and the little runner at the bottom sits parallel, that means that if your cords are a bit tight they rub and are much louder than normal, so I made this as a bracket and then decided it looked dumb, so made a house and landing pad. (or you could just use it as decor)

Tags

科幻角落屋着陆台

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Valorant 杰特的姿态
2023-03-26
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
螺旋齿轮玩具3D模型
2023-03-26
通用型1/10比例底盘 - DKS基础款
2023-03-26
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程
2024-05-02

最新模型