3D模型制作指南：Ender Filament的使用技巧
Ender Filament Guide
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Made a long neck and base with 20mm pitch for Ender V2 and Ender V3 KE. There two bores on each side for a 3mm heated threaded insert for filament runout sensors (especially stock KE).
After I wall mounted my filament spools (because of shaking), I took off the stock holder and replaced with this guide. You can use the threaded holes on the KE or T-nuts on the V2. This will work in any extrusion frame with the correct t-nuts or other printers with a 20mm pitch between fasteners. I printed this in PETG
Remixed version of tommytwothousand's filament guide: https://www.thingiverse.com/thing:2163508
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 KE
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:100
Tags
License
Ender Filament Guide
by axerae is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
Dew Shield for Evoguide 50ED2023-08-07 -
老板螃蟹 KGC-0102023-09-08 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
泡泡底拖鞋2025-07-17 -
女式凉鞋2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24