MN82 后轮轴架悬挂支撑和夹具
MN82 rear axle suspension mounts and clamps
2024-03-14 00:40:15
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This mount lets you use a common 51-53mm 1/18 scale length shocks as it sits 3mm lower than the stock mount (stock shock is 47mm), more robust than using the plastic ball joint and putting a screw into it.
Should be compatible with both plastic and metal axles.
Also have modeled the clamps as mine were easily stripped.
Printed with HP MJF PA12 Nylon
With FDM, clamps should print fine without support but the mounts will require them.
Tags
License
CC BY-NC-SA
MN82 rear axle suspension mounts and clamps
by Daijoubu is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
野马Mach 1雾灯支架模型2024-05-08 -
肯纳经典版阿托-德托星球大战模型2024-05-06 -
Gutter Spike Tent Stake widget2024-05-06 -
罗技千军耳机挂钩2024-05-06
-
笔记本电脑人体工学支架2024-05-06
最热下载
-
三维打印可全制作转盘2023-03-26 -
红米手表4号充电基座2024-03-15 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
Wolf系列手机支架2024-03-26 -
基础鸟饲料架2024-04-30