Dish Brush Holder：带排水和格栅设计
Dish Brush Holder With Drain and Grid
2024-03-14 00:40:15
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I combined the Dish from one thing (added posts on the inside) and the grid from the other thing (copied file, rotated and merged again to make a cross grid pattern) and there you go. Almost exactly how I want it! I want to add small feet to the bottom but printing might be harder then. If you can find small rubber feet to stick to the bottom, that would be nice! Planning to add a separate "ring" for the bottom to lift it up off the counter to keep water from hiding under there and not being able to dry.
Print Settings
- Printer brand:
FlashForge
- Printer:
Adventurer 3
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2mm
- Infill:15%
- Filament brand:
Sunlu
- Filament color:
Black
- Filament material:
ABS
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
安捷ET4 Pro升级套装2023-03-31 -
Worx Landroid M智能机器人终端外壳3D模型2024-01-16 -
SnapMaker 2.0 350T 清洁夹具与排气托盘2024-04-21 -
力量感十足的宙斯3D模型2024-04-29
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Flex Dino钥匙链2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）2025-07-25 -
HGX lite v2支架2025-07-18 -
鞋带锁2025-07-17 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16