Anycubic 单一 6Ks 建模平台滴料支架

Anycubic Mono 6Ks Build Plate Drip Bracket

2024-03-14 01:22:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A bracket to fit on the Anycubic Mono 6Ks resin printer to hold the build plate at a 40° angle to all excess resin to run-off back into the vat.

The bracket is designed to fit onto the Z-arm just behind where the build plate fits and remain in place.
The sizes allow it to remain clear of the plate whilst printing and hold the plate above the vat whilst dripping. Be aware that due to the dimensions of the printer, it may be possible for the bracket to make contact with the resin during the early layers if the vat is full.

The bracket is designed to fit snug on the arm to avoid moving.

Print Settings

Printer brand:
Anycubic
Printer:
Photon Mono_x_6k
Rafts:
No
Supports:
No
Infill:
Solid Fill
Filament brand:
Anycubic
Filament color:
Grey
Filament material:
ABS-Like Pro2
Notes:
If rotating to print, it will need supports added.

I rotated top-down in the slicer and added supports below and between overhangs - I don't recommend doing this, instead print as presented in the STL.

I used the ABS-Like Pro2 resin from Anycubic which allows a little flex whilst fitting and the extra strength to support the plate and any builds.