3dsjs

3FR 1.6 精灵转换器修改版

3FR 1.6 (sprite extruder modification)

2024-03-14 04:53:05

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

3FR 1.6 (3 Fan Radial) mod Creality Ender 3 S1/Creality Sprite Extruder

3FR there have been many fixes and new details added, in particular:

  • "Cabel support" cable locking by Creality Sprite Extruder
  • "Spoler" for hotend. Relevant for large parts (Nylon), where excess cooling is not allowed.
  • "Fastener L" additional mounting point for custom carriages
  • "Clips" holding wires
    and
  • Fastening points ADXL 345 (Need to drill*)
  • Fastening points Led or Camera for nozzles
  • Сhannel for installing a thermistor for measuring motor temperature
  • Fastening points Front panel (Need to drill)
    not all these holes are required, they were closed

Brief instructions:

  • You will need Sprite Extruder
  • Brass threaded inserts*
    Length 4mm, M2 (OD3.2mm) 5pcs
    Length 5mm, M3 (OD 4.5mm) 8pcs
  • Screws M2 and M3 (used original ones + M3/20mm 6pcs)
    *brass threaded inserts are not needed everywhere; you can only get by with 1pcs M3 lower fan mount. With different selection of screws
    Personally printed from ABS 265oC/100oC, in the box at ~40-50oC. Nozzle 0.4mm. Iayer height 0.2mm. Support only used in one part "Cabel support"

Full instructions:
soon

Prospects for further development:
Carriage mount mgn9/12
Both for printing and for creating a composite part (matrix/pulanson)

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender 3

  • Supports:
    Doesn't Matter
  • Resolution:
    0.2
  • Infill:
    25
  • Filament brand:

    fdplast

  • Filament color:

    Black

  • Filament material:

    abs

Tags

3FR 1.6 精灵转换器修改版
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢