灵感来自斯凯纳特尔斯手工艺木制火车的汽车

Cars inspired by Skaneateles Handicrafters Wooden Railway

2024-03-14 06:17:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This complements our Spare Cars for Skaneateles Handicrafters Wooden Railway at https://www.thingiverse.com/thing:6324076 .

You can read about these early wooden railways here: https://www.oldwoodtoys.com/2009_update.htm

This part of the collection is cars that retain the simplicity of the original all wood designs but with some optional modern variations.

The cars can be fitted with magnetic couplers in place of the screw hooks and eyes.

The cars can be fitted with flanged railway wheels.
The flat car is an accurate copy of the wooden part. The others rely on my childhood memories, aided by Internet photos of course.

I expect to add copies of more cars when I find them.

The cars are intended to retain the simple design of the original wooden parts. You should be able to turn them on the printer bed so that support is not needed. Ideally these cars and wheels should be printed using wood filament but my printer does not handle that.

The versions with Duplo or Lego studs are not authentic but people seem to like the idea of Lego on wooden railways. Also included are match trucks to allow these trains to be hauled by modern motorized locomotives with magnet couplers. There is also a matching roof for the Duplo or Lego cars to hide the studs if you prefer.

Here are a few with rail wheels running on vintage 3-rail tin-plate tube rail track:
https://youtu.be/rDoBWMdphGs (between the light rail tram at the front and the big engine at the back.)

Post-Printing

For each car you need four Upholstery Pins. I used pins with a 12mm head. 10mm would look better. The pin diameter is about 1.5mm. The pin length is about 13mm. If your pins are smaller then you must either amend the source code (pending) or use glue.

Some cars needs one screw eye (17mm or less) and/or one matching miniature cuphook.

If making a match truck for modern wooden railway stock then use a magnet to replace either the eye (Ikea, Brio, Thomas etc. tows SHC) or the hook (SHC tows anything with a magnet).

If making a match truck to allow these trains to be towed by a Plarail engine (Japanese model or western plastic Thomas) then just replace the front screw eye with another screw hook.

The magnet is a ferrite ring 10mm diameter, 8mm deep with a 2mm hole.

The pins and magnet should be a tight fit. Use a vice if necessary. Obviously loose pins and magnets are dangerous. Also, check that the wheel spins freely on the pin before pressing the pin into the body.