改进版：最终的简单药丸弹射器打气机 [附加螺钉以固定弹簧]

[REMIX] The Ultimate easy pill popper Punch machine [added pin for spring]]

2024-03-14 06:45:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I appreciated the original design of the pill popper tool created by Chalfontcrew, but I printed out the remix by tmseth with a larger container. However, both versions lacked a solution for securing the spring within the frame.

In this latest remix, I addressed this issue by introducing a small pin measuring 7mm in diameter and 5mm in length and 0.4mm wire thickness. This pin stabilizes the spring, ensuring smooth functionality.

For my setup, I opted to use two 50mm length springs twisted together for added tension. While a single spring would suffice, I preferred the slightly tighter action achieved with the dual setup.

The pin I integrated seamlessly aligns with the hole in the push lever, allowing for uninhibited movement without any restrictions.