空心钟4新盒子设计

New Box design for Hollow Clock 4

2024-03-14 09:45:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I really liked the design of the Hollow Clock 4 but I wanted to change the box. The original had the electronics to be soldered. I knew I would fail at the solder and there wasn't enough room for jumpers so I redesigned the box so I had more room.
The box now has

a screw hole for mounting the motor
a clip to hold the gear in place
a mounting location with 2 screw holes for the Arduino board.
a nice external USB access port for the Arduino board
Room for the jumpers

The motor control board is not mounted.
The gears and the clock itself is the original. One comment - I had to resin print the gears. I could NOT get them to print correctly on my Ender 3.

Hardware Needed
Qty 9 - M2 X 4 Flat Head Phillips Screw - Lid and Clip Mount
Qty 2 - M1 X 3 Phillips head micro screw - Mount of Arduino
Qty 1 - M3 X 8 Socket Head Cap Screw - Mount of Motor

I designed everything so no supports were needed.