便携式磁铁驱动器

Pocket Magnetic Bit Driver

2024-03-15 03:29:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This pocket bit drive (or holder) can be used with HEX ¼" (6,35 mm) bits directly or with adaptators like HEX ¼ to SQUARE ¼", etc.

This model was designed so the bits stays firmly in place but can still be removed without using a tool. Be carefull about the material shrinking if you print it with other material than PLA/PLA+/PLA-HD.

There is also a hole at the back (top) of the tool where you can, optionnally, place a circular magnet that will holds the bit in place. The hole has a diameter of 10 mm and a depth of 3 mm so can use 10x3 mm, 10x2 mm or 10x1 mm magnets.

If you plan to use this tool in contact with hot parts, for example if you want to use it to unscrew a 3D printer's nozzle, you might want to print it in a material that is less sensible to heat than PLA. You should try ASA or PETG.

Assembly

If you printed the magnetic version, you can add a 10 mm diameter magnet at the top of the tool.

Then just use ¼" HEX BITS with the tool. :)

Where to buy materials?

You can purchase the same magnets I used : 10 mm x 3 mm NEODYME powerfull magnets from Amazon : https://amzn.to/3IApy2x
Optionnaly, can you also buy an HEX ¼" to Square ¼" adapter from Amazon : https://amzn.to/3Tgx8Ea