阿尔托德金属盒子管理工具

Altoid Tin Organizers

2024-03-16 03:26:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I started off making a rack for some Altoid tins I had collected over the years. I soon ran out of tins. So I printed some. Then I realized that a package of screws from Home Depot holds just a little too many screws to fit in the tins. So I made a rack that holds three tins instead of four. The new tins are slightly taller. And just for completeness, I made a rack that holds 2 tins.

All the racks are the same height and width and they all have nesting feet and dimples so you can stack them.

My workbench is now a lot cleaner.

Print Settings

Printer brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No

How I Designed This

All the parts were designed in Blender 4.0.2 and exported as STL. I used Boolean construction and didn't worry about topology. The Prusa slicer does a good job of fixing all the mistakes in the file caused by the Boolean operations. The STL file provided here are exported from the Prusa slicer after being fixed.