Din rail for tools and clothes
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Для приведения в порядок инструмента решил создать модульную систему , чтоб можно было менять конфигурацию в зависимости от потребностей. За основу крепления взял дин рейку.
На данный момент сделаны
- крючки для подвешивания молотков, оборудования, одежды и т.д. длиной 40 и 50 мм
- крепления под винты М4 и М5. Длина винтов выбирается в зависимости от подвешиваемого инструмента. Диаметр от массы подвешиваемого оборудования. На них так же можно подвешивать любые кармашки, горшочки, панели и т.д. Количество креплений подбирается так же от массы подвешиваемого оборудования.
- Полочки под отвертки, стамески и т.д.
Заполнение деталей при печати зависит от нагрузки на деталь и используемого материала. На моих моделях заполнение 30-40%
По мере появления новых креплений буду обновлять данную публикацию.
Если вам не хватает креплений , пишите будем добавлять. :)
Translated by Yandex:
To put the tool in order, I decided to create a modular system so that the configuration could be changed depending on the needs. The mounting was based on a din rail.
At the moment, the following have been done
- hooks for hanging hammers, equipment, clothes, etc. 40 and 50 mm long
- fasteners for M4 and M5 screws. The length of the screws is selected depending on the tool being hung. The diameter depends on the weight of the suspended equipment. They can also be hung with any pockets, pots, panels, etc. The number of fasteners is also selected from the weight of the suspended equipment.
- Shelves for screwdrivers, chisels, etc.
The filling of the parts during printing depends on the load on the part and the material used. On my models, the filling is 30-40%
As new fasteners become available, I will update this publication.
If you do not have enough fasteners, we will add them. :)
Print Settings
- Printer brand:
Tronxy
- Printer:
Tronxy X5SA/X5ST/Pro/2E 400mm
- Supports:No
- Resolution:0.2
- Infill:40
- Notes:
Заполнение выбирается в зависимости от нагрузки на деталь.
Translated by Yandex:
The filling is selected depending on the load on the part.
猜你喜欢
联系我们
最新模型
-
卡斯特罗维亚尼亚跳蚤人2024-05-08
-
1/56 比例(约28毫米)戈瑞什小人2024-05-08
-
砂布圆盘转孔2转换器2024-05-08
-
罗技千军耳机挂钩2024-05-06
-
笔记本电脑人体工学支架2024-05-06
最热下载
-
沃帕尔六足行走机器人2023-03-26
-
原始控制舱2024-03-25
-
法兰尺寸测量工具(小)2024-04-19
-
沙箱建筑模型2024-05-08