Minn Kota电动机推进器3D模型
Minn Kota Electric Motor Prop
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A prop I designed for a 30lb Minn Kota motor. One is a base model, the other I put some tubercles like those of a whale fin on.
I do not have any data on the performance vs factory props and I expect mine would perform the same or slightly worse as I made it without fluid simulation & in Blender.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.08
- Infill:25%
- Filament brand:
Esun
- Filament material:
PLA+
- Notes:
I used a higher infill to increase the strength. For the latter you should also print the props on their side so the force of pushing water doesn't pull the layers apart.
Higher resolution will increase the print time, but make the final result smoother.
Print time for me was 42 hours.
Post-Printing
How I Designed This
Hardest part of the design process was sizing up the center to fit the driving pin & shaft while being flush on the outside.
License
Minn Kota Electric Motor Prop
by CoalMineCanary is licensed under the Creative Commons - Attribution license.
猜你喜欢
联系我们
热门推荐
-
恐龙摩天轮 3D模型2023-03-26 -
牙齿化石2023-06-19 -
哥特式吊灯：夜空之光2024-02-04 -
佩格洛克锁具盒与架子设计模型2024-04-04 -
泡泡底拖鞋2025-07-17
最热下载
-
Ikea 米兹顿 插嵌2024-04-20 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
比基尼模型2025-07-16
最新模型
-
坏龙家的大宝贝女生别下2025-06-26 -
Mini砂块旋钮2024-05-08 -
垂直货架固定支架2024-05-08 -
魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换2024-05-08 -
扭曲爱好降落伞安全带2024-05-06