火箭人改进型飞行背包3D模型
Rocketeer Jetpack - Modified
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
After printing dorkle's Rocketeer Jetpack I got to work making modifications to the files.
Mods:
-
The main center vent has been thickened so its stronger, the original broke almost immediately. I have included both the whole center piece with the modified vent and a split version.
-
The middle rocket housing and thruster has been modified to slide together with a connector for superior gluing surface and strength.
-
I made a connector piece to go in between the middle and top rocket housing for superior gluing surface, alignment and strength. Unlike the middle to bottom connector which I added permanently into the middle piece, I did this connector separate so the top and middle piece could be printed with less supports.
-
I modified the bottom flaps to sit flat on the build plate
-
Instead of using a fan support bracket I made a fan housing. First glue the fan into the housing and then glue the housing behind the center vent. This prevents you from seeing that the inside is hollow and hide any added supports you my put in (I added 2x4's inside mine to give the pack extra weight to feel a little more realistic and i screwed the rocket housing to the 2x4's through the center cowling to give it more robust support for cosplay.
-
I resized the housing vents to fit better, also with the thruster mod I did you can now put the vents in before attaching the thruster. (before you could not, it wouldn't fit.)
- I oriented all the files for the best printing orientation and included separate files for all the right and left parts.
I have printed all these mods at a smaller scale to insure they all work and will be printing a larger scale soon.
Dorkle's model is still awesome and I was very happy with it despite the few flaws. It is pictured above.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 3 Plus
- Rafts:Yes
- Supports:Yes
- Resolution:.3 & .2
- Infill:10
- Notes:
I did .3 res for all the main body parts and .2 for the fan, vents, nose cones and top fin
Post-Printing

Scaled down version of the modified rocket housing and thruster
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
Walksnail Avatar 1S 轻量版摄像头支架(加长版)2023-03-26
-
圣路易斯蓝鸟队NHL冰球 puck标志(混音版)- 巴姆布鲁实验室 3mf2023-05-13
-
灵活抽屉分隔系统2024-01-13
-
可动关节龙免费领域2024-04-16
-
备用摄像头支架(适用于Type S 6.8寸触摸屏)2024-05-05
最热下载
-
3D打印斯特林发动机型号Alpha2023-03-26
-
Quansheng UVK6 桌面支架2024-01-10
-
3D模型:Easier Print LTT螺丝刀拉拔器2024-01-14
-
Woods Mower 30922 护盾保持者2024-04-24
-
螺旋锥形手玩具(全新)2024-05-08
最新模型
-
智能路甲车通风控制杆2024-05-08
-
铝制转角圆角 20202024-05-08
-
里奥兰德350瓦特6-60V PWM DC 无刷电机速度控制器安装基座2024-05-08
-
宜家 手把导向器2024-05-08
-
智能座椅滑动设计2024-05-06