GPS追踪器 rf-v13 外壳
GPS Tracker rf-v13 holder
2024-03-16 22:09:19
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The small and cheap GPS Tracker rf-v13 is awesome but as always to get it in a good position can be tricky.
To get some distance between transmitter and magnet i disigned this holder for my garage door protection and glued it.
One version with appr 11mm distance and ohne flat.
- one screw mount
- a USB-cable can still be connected.
- you can put the tracker both ways in
- it will protect the label
- u can close the led side with tape to make it unvisble
- will fit both ways in the holder. One side a little more loose than the other, but to able to use the shocksensor its ok.
No Supports needed thanks to the bridging abilitys of a 3d printer.
Print Settings
- Printer brand:
Creality
- Printer:
CR-10
- Supports:No
- Infill:7
Tags
License
CC BY
GPS Tracker rf-v13 holder
by hmgGerd is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
车身RC 1/10 全套2023-03-26 -
星球大战3D棋盘模型：MrBaddeleys国际象棋棋子50%比例展示2023-08-24 -
FrSky X 20 S FPV屏幕持有器 + 三脚架适配器（橡胶带）2024-01-10 -
乒乓球无气2024-04-22 -
凯撒自行车遥控架2024-05-04
最热下载
-
21700毫安电池单元保持架2024-04-06 -
地牢方块积木，定制升降装置 1x1型定制立管(兼容地下城积木)2025-07-16 -
幻想磁力2024-05-03 -
中指2025-05-17 -
比基尼模型2025-07-16
最新模型
-
blink门铃钥匙2024-05-08 -
失落的索罗恩斯2024-05-08 -
Amphenol MC3M 适用于经典版舒尔话筒2024-05-08 -
特斯拉P40风扇适配器2024-05-06 -
Shift Collar Boot Support - 可调节领口靴子支撑2024-05-06