HO规模 SD40 型燃油箱 3D模型

Fuel Tank for HO Scale SD40

2024-03-17 01:58:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I got a Kato SD40 frame without the fuel tank cover, so I set out to design one of my own. I used blender to design the part, and Cura to slice using my normal settings. Length is 67mm, 37mm wide, and a little more than 14mm high. I did have to do a little trimming to get a good fit. There are depressions made for screw holes on the bottom if you think you'll need access to the motor screws. Also, be careful removing supports so you don't accidentally pull off the small details like the fuel fillers (unless you want to use your own). Anyone, please feel free to make changes or recommendations. Thanks

Print Settings

Rafts:
Yes
Supports:
Yes
Resolution:
Fine .012mm
Infill:
25%
Filament brand:
Ankermake
Filament color:
Grey
Filament material:
PLA+
Notes:
I set my printer to use 235c for the nozzle and 65c for the heat bed temp. Cura is set to use a 1mm air gap between the supports and the model for easier support removal, and I print the model 3mm off the heat bed.