Glowing Nerf Rival Round

2024-03-17 02:12:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Shell for a nerf rival round compatible with Aogist LED balloon lights that can be found in the link below. Print the shell, press fit the balloon lights into the shell and you're ready to go.

https://www.amazon.com/dp/B0CGZXQG66/ref=twister_B0CK4NC8Y2?_encoding=UTF8&th=1

These rounds are only compatible with springer rival blaster and will not work with flywheels. This is because the gap between the flywheels is less than the height of the LED and it cannot be squeezed through. It can only be guaranteed that these rounds work for the Nerf Roundhouse as it is the only blaster these rounds have been tested on.

Caution Because these rounds are heavier and stiffer than a normal Rival round they don't fly as far and will hurt on impact. Use eye protection while using.

Print Settings

Printer brand:
Bambu Lab
Printer:
A1 Mini
Rafts:
Yes
Supports:
Yes
Infill:
10%
Filament brand:
Overture
Filament color:
Clear
Filament material:
TPU
Notes:
Especially with a textured print bed, print with a layer of raft and supports near the bottom to help maintain roundness.

Post-Printing

Insert LED

Insert the Aogist LEDs with the LED facing inward. The LEDs can be found at this link:
https://www.amazon.com/dp/B0CGZXQG66/ref=twister_B0CK4NC8Y2?_encoding=UTF8&th=1

It may be helpful to super glue the two halves of the LED together because they are prone to falling apart after impact. The press fit between the LED and the shell is pretty tight and doesn't need to be glued in my experience.