WS2811 杰森头像 3D模型

WS2811 Jason Mask

2024-03-17 10:00:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a prop for WS2811 LED lights. It holds 158 pixels. The tolerances are pretty tight at 0.2mm so make sure your printer is dialed in correctly. This has been split to fit on a standard Ender 3 bed. There are 4 bigger parts that will print on a slighty larger bed so those have been included as well. If you are printing on a 220x220 bed then use the "split" version of the files, otherwise just use the numbered version. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. I have included the xlights xmodel in the download.