Corsair前置面板

Corsair Front Panel

2024-03-17 10:43:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I originally designed this for the Corsair Spec Delta computer case, but i'm sure it will work on other Corsair Mid Tower ATX cases. it will probably work on other manufacturers also.

The Spec Delta pro has almost no front ventilation with its stock front panel. the middle fan was basically useless. so, I made my own front panel to allow better airflow. The panel is designed to mount flush with the fans, around the outside so the are not obstructed. i also bought 120mm screw on fan filters to complete the all black front look.

I printed mine with Black ATARAXIA ART Flexible PLA and then I glued the two pieces together and sprayed the whole panel with 2 coats of Black TAMIYA Spray Lacquer (TS-14). it looks and feels like the plastic extruded panel it replaced in normal light. the cameras flash made it look shiny.

I choose Flexible PLA because i wanted to be able to remove the panel and stick it back on without worrying about the clips breaking. I know this part works perfectly fine printed in PLA because i did all my testing in PLA. TPU or PETG will also work, i also choose Flexible PLA because i can print it at nearly the same speed i print PLA at.

I printed this on my Prusa XL (2H), but it will work on a normal size bed if printed vertical instead of flat. if there are enough requests I will make a remix of this designed for smaller beds. I attached the SolidWorks files I used to create just in case someone wants to remix this for their case.

Print Settings

Printer brand:
Prusa
Printer:
Prusa XL
Rafts:
No
Supports:
Yes
Resolution:
.6
Infill:
15
Filament brand:
ATARAXIA ART
Filament color:
Black
Filament material:
Flexible PLA
Notes:
I used tree supports only on sections that were used to connect the 2 half's together.