Cable Management Box

Box for Cord Management

2024-03-17 13:04:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a cord winder box that I made for cable management. Print-in-place; you thread the cord through the slots and inbetween the center prongs on the knob.stl, and snap the box.stl on top. Then, you twist the knob to reel the cord in to keep it from taking up as much space or tangling with something else. To unreel the cord, just pull on it from both sides. Showcase below.
*Note: Some of the parts on the initial layer may not properly be sliced in some slicers due to being too thin, so you may have to edit your setting to “detect thin walls” or similar.
https://youtube.com/shorts/iOgIZ2eQy9c?feature=share