Sculpto Pro2 3D型号 GoPro 安装架

Sculpto Pro2 GoPro mount

2024-03-18 00:47:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The original design turned out to not fit the thicker Sculpto Pro2 build plate.

I intended to slightly modify the original design for the thicker plate, but because of the very rough curve approximations I decided to start from scratch, heavily inspired by the original design, though, therefore posting it as a remix.

I also decided to turn the vertical direction, so now it requires support. This is because, printing it lying on the side as in the original design, turned out be be somewhat rough.

Print Settings

Printer brand:
Sculpto
Printer:
Sculpto+
Rafts:
Doesn't Matter
Supports:
Yes
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Notes:
NOTE: For the 6mm thick build plate of Sculpto Pro2 - but that model cannot be selected in the Thingiverse drop-down.
Needs support, at least because of the build plate channel. Can also be printed lying on the side, whereby support can be avoided, but with a more rough result.