G923型号的F1轮子，用于雕刻托盘（20cm圆形打印床）及F1标志

G923 F1 Wheel for Sculpto 20cm round print bed and F1 logo

2024-04-01 20:49:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed to modify the original version by pcrowlz (https://www.thingiverse.com/thing:5160274) because the frame was a bit too large for the Sculpto Pro 2 print bed (its circular!).
1) I needed to cut off the upper corners of the frame. I did not bother with extending the recesses and make new screw holes - I just used a screw at the the lower connectors, but only glued the upper where the screw hole had been removed.
2) To not look too goofy, I also made a new version of the upper handles pieces, so the extend over the part that was removed from the frame.
3) For the lower handle pieces and buttons, you should just use the ones from pcrowlz design: https://www.thingiverse.com/thing:5160274, or the remixed buttons from Holland37: https://www.thingiverse.com/thing:5569081.
4) I also added the Formula 1 logo to the center of the new frame. This use is an unofficial fan use, and is not associated in any way with the Formula 1 companies. F1 and related marks are trade marks of Formula One Licensing B.V. I am therefore not sharing the print file for the logo.