G29 G920 G923 定制轮圈模组 Xbox 按钮套壳

G29 G920 G923 Custom Wheel Mod Xbox Button Cover

2024-04-04 22:06:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Re mix of B-Quan Button Plate https://www.thingiverse.com/thing:6304772
for use with MB992 Custom wheel mod.https://www.thingiverse.com/thing:5337551/remixes

Both designed for G29 G923 Logitech Wheel Mod Adding aftermarket wheel.

This was designed for the Xbox/PC wheel to go around the Round button vs B-Quan PlayStation button option.

Once printed, and without the original wheel to protect the fragile R3 L3 button stalks, i was worried i might break them off with some erratic hand movements.

This should offer some protection and also fill the gap the original wheel left to make it look more complete.
The model is 3mm thick and because the plate needs to bend at some points, I've included some 2.2mm slots, so it can fold. The slots are designed to be on the back side so they are not visible.

If you fold the part straight after the print has finished and is still warm, it bends very easily. I used the back of the original wheel as a guide so i didn't over bend it.