玩具电话挂架

Toy Phone Hanger

2024-03-18 01:16:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a very specific design for an old toy phone. But I wanted to post it anyway to show the results of printing in two different orientations.

I wanted to print the holder at an angle (as shown on the left) because it meant I wouldn't need any supports. But, I didn't expect it to work. For some reason, I really expected the text to fail. So I also printed it lying flat, adding supports under the hook.

Wow, was I surprised! They both worked, but the one printed at an angle looks much nicer! It doesn't have that "top layer" finish. It just looks more refined to me. Needless to say, that's the one we used. We just stuck it to the side of a toy hutch with a command strip.

See the complete play-kitchen this hanger was designed for at https://www.thingiverse.com/thing:6536981