高精度空气枪瞄准器支架 - Begadi竞技版

Airsoft Scope Mount - Begadi "Competition"

2024-03-18 02:41:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

NON-AFFILIATE LINKS:
Coustom scope riser for the Begadi "Competition" scope:
https://www.begadi.com/zielhilfen/zielfernrohre/zielhilfen-zielfernrohre-begadi-competition-zielfernrohr-1-2-6-x-24-ir-30mm-mittelrohr-beleuchtet-inkl-killflash-montage-flipup-cover-schwarz.html

Top red dot:
https://www.amazon.de/gp/product/B06W2PKXLT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Of course, other models also fit. This is supported by the customized washers. Please scale these for your scope.

Rubber bumpers have been used in the mounting clamps. Its a notch-integrated design.
Used m3 bolts that were laying around. All of them were cut to fit nicely.
M3 square nuts are embedded.

Print Settings

Printer brand:
Prusa
Printer:
i3 MK4
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
100 %
Filament brand:
Overture
Filament color:
Black
Filament material:
PLA
Notes:
Please print the "Mount" and the "Klemme_1" & "Klemme_2" upright to increase the strength. This might be difficult on your printer so make sure you are using a sufficient support density and organic support.

You can of course use materials other than PLA, but printing is quite difficult with all the embedded nuts and the upright orientation.