手帕架

hand towel rack

2024-03-18 03:23:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Small hand towel rack for small decorative hand towels.
Larger towel if you scale it up.
This was a wife request.
Custom made for our bathroom sink corner space.

Print Settings

Printer brand:
Creality
Printer:
CR-10S5
Rafts:
No
Supports:
No
Resolution:
Walls1.6mm thick at 0.2mm layer height and FUZZY SKIN
Infill:
cubic 15%
Filament brand:
Inland (Esun)
Filament color:
Sliver
Filament material:
PLA+
Notes:
There is a full model but I DO NOT suggest you print that. PRINT EACH PIECE for the best strength. There are alignment holes for filament in each piece. Print top bottom down, the bottom top down and the middle on its back with a brim. Pieces should be in their proper orientation when imported. No supports needed.
I used Fuzzy Skin to give it a more Organic look and to hide print lines.