另一个NEMA 23线路套用于GX16-4P插座
Yet Another NEMA 23 Wire Cover for GX16-4P plug
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix from this:
https://grabcad.com/library/nema-23-covers-for-gx16-4p-plug-1
I shortened it, moved the holes back from the wire side a tad, enlarged them, made the plug hole narrower where the flat sides are on the plug, and recessed the the plug slightly. I used 20mm M3 socket head cap screws. As with all covers of this type, you have to take the original screws off the stepper (one at a time!) and shorten them by 2-3mm.
Print Settings
- Printer brand:
Creality
- Printer:
CR-10
- Rafts:No
- Supports:Yes
- Infill:20%
- Filament brand:
Overture
- Filament color:
Does not matter
- Filament material:
PLA Professional
- Notes:
I print these on their back with support under the screw holes. The slicer might want to put support inside the tapered wire cover - my printer didn't need it so I removed it from that area.
How I Designed This
Designed in Tinkercad.
相关内容
联系我们
热门推荐
-
柔软型最大级驱赶器支架2024-04-20 -
8英寸望远镜的电源盒2024-04-21 -
收缩包装开启器2024-04-24 -
电源已开启2024-05-03 -
Base Jigkick v2 for psp Baryon Sweeper2024-05-06
最热下载
-
原始控制舱2024-03-25 -
地牢方块积木，定制升降装置 1x1型定制立管(兼容地下城积木)2025-07-16 -
幻想磁力2024-05-03 -
中指2025-05-17
最新模型
-
厨房水槽滤网过滤器2025-06-05 -
1/56 比例（约28毫米）戈瑞什小人2024-05-08 -
精简设计80mm汽车转速表仪表壳2024-05-06 -
仙人掌牙签盒2024-05-06 -
飞机EGT模型2024-05-06